U.K. 0044 1527 404 305 mobile 0044 7786 198 885
e-mail email@example.com or use our contact form.
Around 18% of total heat loss is through the windows.
Cut out draughts and reduce heat loss through your windows using SALGLAZE secondary glazing. Keeping the warm air in the house will save you money on heating. The SALGLAZE system in which a sheet of special rigid clear plastic is fitted onto the inside window frame in such a way that it can be put up or taken down as the season requires. The system uses a special Velcro tape to attach the secondary glazing to the frame. The system also reduces condensation and outside noise.
NO NEED TO REPLACE WINDOWS OR WINDOW FRAMES.
The secondary glazing can be taken down and stored when not needed so can be put up in the winter and taken down in the summer.
SALGLAZE SECONDARY GLAZING comprises of two separate components - a super - clear flexible rigid plastic sheeting and Touch & Close, a simple, quick-removable two part fastening tape made by Velcro. Press one half of the Touch & Close to the edges of the plastic sheet and the other half to the inside metal or wooden window frame. The secondary glazing can be taken off and stored when not needed.
Do you suffer from any of the following?
Then help is at hand with the low cost SALGLAZE SECONDARY GLAZING SYSTEM.
You will be able to Reduce Heat loss, Condensation, Draughts & Noise and keep heat in with your own DIY SALGLAZE SECONDARY GLAZING SYSTEM. If you are not a DIY person our fully qualified fitters can install it for 10€ a window. This rigid piece of specially formulated plastic sheet held in position by a specially formulated Velcro fastening from just 50€ per standard window.
SAVE MONEY ON YOUR HEATING BILLS AND KEEP HEAT IN THE HOUSE